| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 |
| 比重 | | ASTMD792 | 1.84 | g/cm3 |
| 密度 | | ASTMD792 | 1.83 | g/cm3 |
| 吸水率(24hr,50%RH) | | ASTMD570 | 0.010 | % |
| 拉伸模量2 | | ASTMD638 | 1710 | MPa |
| 拉伸模量 | | ISO527-2/1 | 1520 | MPa |
| 抗张强度3(屈服) | | ASTMD638 | 29.0 | MPa |
| 拉伸应力(屈服) | | ISO527-2/5 | 27.0 | MPa |
| 抗张强度3(断裂) | | ASTMD638 | 21.0 | MPa |
| 拉伸应力(断裂) | | ISO527-2/5 | 22.0 | MPa |
| 伸长率3(屈服) | | ASTMD638 | 23 | % |
| 拉伸应变(屈服) | | ISO527-2/5 | 22 | % |
| 伸长率4(断裂) | | ASTMD638 | 53 | % |
| 拉伸应变(断裂) | | ISO527-2/5 | 78 | % |
| 弯曲模量4(50.0mm跨距) | | ASTMD790 | 1280 | MPa |
| 弯曲模量5 | | ISO178 | 1220 | MPa |
| 弯曲应力 | | ISO178 | 24.0 | MPa |
| 悬壁梁缺口冲击强度(23°C) | | ASTMD256 | 620 | J/m |
| 悬壁梁缺口冲击强度6(23°C) | | ISO180/1A | 38 | kJ/m2 |
| 悬壁梁缺口冲击强度(23°C) | | ASTMD4812 | 1300 | J/m |
| 无缺口伊佐德冲击强度5(23°C) | | ISO180/1U | 120 | kJ/m2 |
| 装有测量仪表的落镖冲击(23°C,TotalEnergy) | | ASTMD3763 | 26.5 | J |
| 载荷下热变形温度(0.45MPa,未退火,3.20mm) | | ASTMD648 | 88.0 | °C |
| HeatDeflectionTemperature7(0.45MPa,Unannealed,64.0mmSpan) | | ISO75-2/Bf | 89.0 | °C |
| 载荷下热变形温度(1.8MPa,未退火,3.20mm) | | ASTMD648 | 52.0 | °C |
| 热变形温度7(1.8MPa,未退火,64.0mm跨距) | | ISO75-2/Af | 50.0 | °C |
| 线形热膨胀系数-流动(-30到30°C) | | ASTMD696 | 8.0E-5 | cm/cm/°C |
| CLTE-Transverse(-30to30°C) | | ASTMD696 | 8.7E-5 | cm/cm/°C |
