| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 |
| 比重 | | ASTMD792 | 1.32 | g/cm3 |
| 密度 | | ASTMD792 | 1.32 | g/cm3 |
| 收缩率-流量(24小时) | | ASTMD955 | 0.10to0.30 | % |
| MoldingShrinkage-AcrossFlow(24hr) | | ASTMD955 | 0.40to0.60 | % |
| 吸水率(24hr,50%RH) | | ASTMD570 | 0.060 | % |
| 吸水率(平衡,23°C,50%RH) | | ISO62 | 0.070 | % |
| 拉伸模量2 | | ASTMD638 | 7210 | MPa |
| 拉伸模量 | | ISO527-2/1 | 6820 | MPa |
| 抗张强度3(屈服) | | ASTMD638 | 96.4 | MPa |
| 拉伸应力(屈服) | | ISO527-2/5 | 91.5 | MPa |
| 抗张强度3(断裂) | | ASTMD638 | 96.4 | MPa |
| 拉伸应力(断裂) | | ISO527-2/5 | 91.5 | MPa |
| 伸长率3(屈服) | | ASTMD638 | 1.9 | % |
| 拉伸应变(屈服) | | ISO527-2/5 | 1.9 | % |
| 伸长率4(断裂) | | ASTMD638 | 2.7 | % |
| 拉伸应变(断裂) | | ISO527-2/5 | 1.9 | % |
| 弯曲模量4(50.0mm跨距) | | ASTMD790 | 6790 | MPa |
| 弯曲模量5 | | ISO178 | 6440 | MPa |
| 弯曲应力 | —— | ISO178 | 137 | MPa |
| 弯曲应力 | ——5,6 | ISO178 | 137 | MPa |
| 弯曲强度4(屈服,50.0mm跨距) | | ASTMD790 | 135 | MPa |
| 弯曲强度5(断裂,50.0mm跨距) | | ASTMD790 | 135 | MPa |
| 摩擦系数 | Dynamic | ASTMD3702Modified | 0.44 | |
| 摩擦系数 | Static | ASTMD3702Modified | 0.59 | |
| 磨损因数-Washer | | ASTMD3702Modified | 93.5 | 10^-10in^5-min/ft-lb-hr |
| 悬壁梁缺口冲击强度(23°C) | | ASTMD256 | 99 | J/m |
| NotchedIzodImpactStrength7(23°C) | | ISO180/1A | 10 | kJ/m2 |
| 悬壁梁缺口冲击强度(23°C) | | ASTMD4812 | 520 | J/m |
| UnnotchedIzodImpactStrength7(23°C) | | ISO180/1U | 30 | kJ/m2 |
| 装有测量仪表的落镖冲击(23°C,TotalEnergy) | | ASTMD3763 | 12.8 | J |
| 多轴向仪器化冲击能量 | | ISO6603-2 | 2.94 | J |
| 载荷下热变形温度(0.45MPa,未退火,3.20mm) | | ASTMD648 | 138 | °C |
| HeatDeflectionTemperature8(0.45MPa,Unannealed,64.0mmSpan) | | ISO75-2/Bf | 139 | °C |
| 载荷下热变形温度(1.8MPa,未退火,3.20mm) | | ASTMD648 | 133 | °C |
| HeatDeflectionTemperature8(1.8MPa,Unannealed,64.0mmSpan) | | ISO75-2/Af | 133 | °C |
| 线形热膨胀系数-流动(-30到30°C) | | ASTMD696 | 6.1E-5 | cm/cm/°C |
| CLTE-Transverse(-30to30°C) | | ASTMD696 | 4.6E-5 | cm/cm/°C |
