| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 |
| 比重 | | ASTMD792 | 1.10 | g/cm3 |
| 溶化体积流率（MVR）(280°C/5.0kg) | | ISO1133 | 10.0 | cm3/10min |
| 拉伸模量2 | | ASTMD638 | 2800 | MPa |
| 拉伸模量 | | ISO527-2/1 | 2730 | MPa |
| 抗张强度3(屈服) | | ASTMD638 | 76.0 | MPa |
| 拉伸应力(屈服) | | ISO527-2/50 | 76.0 | MPa |
| 抗张强度3(断裂) | | ASTMD638 | 55.0 | MPa |
| 拉伸应力(断裂) | | ISO527-2/50 | 55.0 | MPa |
| 伸长率3(屈服) | | ASTMD638 | 4.7 | % |
| 拉伸应变(屈服) | | ISO527-2/50 | 4.7 | % |
| 伸长率4(断裂) | | ASTMD638 | 9.7 | % |
| 拉伸应变(断裂) | | ISO527-2/50 | 9.4 | % |
| 弯曲模量 | 50.0mm跨距4 | ASTMD790 | 2840 | MPa |
| 弯曲模量 | 6.40mm | ASTMD790 | 2840 | MPa |
| 弯曲模量5 | | ISO178 | 2580 | MPa |
| FlexuralStress5,6 | | ISO178 | 114 | MPa |
| 弯曲强度 | 屈服,50.0mm跨距4 | ASTMD790 | 113 | MPa |
| 弯曲强度 | Yield,6.40mm | ASTMD790 | 114 | MPa |
| 简支梁缺口冲击强度7 | -30°C | ISO179/1eA | 8.0 | kJ/m2 |
| 简支梁缺口冲击强度7 | 23°C | ISO179/1eA | 11 | kJ/m2 |
| 悬壁梁缺口冲击强度 | -30°C | ASTMD256 | 60 | J/m |
| 悬壁梁缺口冲击强度 | 23°C | ASTMD256 | 130 | J/m |
| 悬壁梁缺口冲击强度8 | -30°C | ISO180/1A | 8.0 | kJ/m2 |
| 悬壁梁缺口冲击强度8 | 23°C | ISO180/1A | 10 | kJ/m2 |
| 装有测量仪表的落镖冲击(23°C,TotalEnergy) | | ASTMD3763 | 52.0 | J |
| HeatDeflectionTemperature9(0.45MPa,Unannealed,64.0mmSpan) | | ISO75-2/Bf | 133 | °C |
| 载荷下热变形温度 | 1.8MPa,未退火,3.20mm | ASTMD648 | 118 | °C |
| 载荷下热变形温度 | 1.8MPa,未退火,6.40mm | ASTMD648 | 122 | °C |
| HeatDeflectionTemperature9(1.8MPa,Unannealed,64.0mmSpan) | | ISO75-2/Af | 118 | °C |
| 维卡软化温度 | —— | ISO306/A120 | 150 | °C |
| 维卡软化温度 | —— | ISO306/B120 | 140 | °C |
| BallPressureTest(125°C) | | IEC60695-10-2 | Pass | |
| RTIElec | | UL746 | 110 | °C |
| RTIImp | | UL746 | 105 | °C |
| RTIStr | | UL746 | 110 | °C |
| 漏电起痕指数 | | IEC60112 | 250 | V |
| 高电压电弧起痕速率(HVTR) | | UL746 | PLC4 | |
| UL阻燃等级 | 0.75mm,TestingbySABIC | UL94 | V-0 | |
| UL阻燃等级 | 2.0mm,TestingbySABIC | UL94 | 5VB | |
| UL阻燃等级 | 2.5mm,TestingbySABIC | UL94 | 5VA | |
| 灼热丝易燃指数(0.75mm) | | IEC60695-2-12 | 960 | °C |
| 热灯丝点火温度 | 0.8mm | IEC60695-2-13 | 750 | °C |
| 热灯丝点火温度 | 1.5mm | IEC60695-2-13 | 775 | °C |
