| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 |
| 密度 | | ISO1183/A | 1.04 | g/cm3 |
| 拉伸模量 | | ISO527-2/1A/1 | 1750 | MPa |
| 拉伸应力(屈服) | | ISO527-2/1A/50 | 46.0 | MPa |
| 拉伸应变(屈服) | | ISO527-2/1A/50 | 5.0 | % |
| 标称拉伸断裂应变 | | ISO527-2/1A/50 | >100 | % |
| 弯曲模量2 | | ISO178 | 1250 | MPa |
| 弯曲应力2 | | ISO178 | 52.0 | MPa |
| FlexuralStrainatFlexuralStrength | | ISO178 | 8.00 | MPa |
| 简支梁缺口冲击强度 | -30°C | ISO179/1eA | 30 | kJ/m2 |
| 简支梁缺口冲击强度 | 23°C | ISO179/1eA | 98 | kJ/m2 |
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | NoBreak | |
| 简支梁无缺口冲击强度 | 23°C | ISO179/1eU | NoBreak | |
| 热变形温度(0.45MPa,未退火) | | ISO75-2/Bf | 145 | °C |
| 热变形温度(1.8MPa,未退火) | | ISO75-2/Af | 60.0 | °C |
| 维卡软化温度 | —— | ISO306/A50 | 200 | °C |
| 维卡软化温度 | —— | ISO306/B50 | 140 | °C |
| 燃烧速率 | | ISO3795 | <20 | mm/min |
| FlammabilityClassification | 1.5mm | IEC60695-11-10,-20 | HB | |
| FlammabilityClassification | 3.0mm | IEC60695-11-10,-20 | HB | |
| 灼热丝易燃指数 | 1.5mm | IEC60695-2-12 | 725 | °C |
| 灼热丝易燃指数 | 3.0mm | IEC60695-2-12 | 725 | °C |
| 热灯丝点火温度 | 1.5mm | IEC60695-2-13 | 750 | °C |
| 热灯丝点火温度 | 3.0mm | IEC60695-2-13 | 750 | °C |
