| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 |
| 密度 | | ISO1183 | 1.32 | g/cm3 |
| 收缩率 | 横向流量 | ISO294-4 | 1.4 | % |
| 收缩率 | 流量 | ISO294-4 | 1.3 | % |
| 拉伸模量 | | ISO527-2 | 2400 | MPa |
| 拉伸应力(屈服) | | ISO527-2 | 60.0 | MPa |
| 拉伸应变(屈服) | | ISO527-2 | 5.5 | % |
| 标称拉伸断裂应变 | | ISO527-2 | 15 | % |
| TensileCreepModulus(1hr) | | ISO899-1 | 2300 | MPa |
| 拉伸蠕变模量(1000hr) | | ISO899-1 | 1500 | MPa |
| 弯曲模量 | | ISO178 | 2400 | MPa |
| 简支梁缺口冲击强度(23°C) | | ISO179/1eA | 4.0 | kJ/m2 |
| 悬壁梁缺口冲击强度(23°C) | | ISO180/1A | 4.5 | kJ/m2 |
| 热变形温度(0.45MPa,未退火) | | ISO75-2/B | 125 | °C |
| 热变形温度(1.8MPa,未退火) | | ISO75-2/A | 60.0 | °C |
| 熔融温度2 | | ISO11357-3 | 228 | °C |
| 漏电起痕指数 | | IEC60112 | 575 | V |
| UL阻燃等级 | 0.75mm | UL94 | HB | |
| UL阻燃等级 | 1.5mm | UL94 | HB | |
| FlammabilityClassification | 0.75mm | IEC60695-11-10,-20 | HB | |
| FlammabilityClassification | 1.5mm | IEC60695-11-10,-20 | HB | |
| 充模分析 | | TestMethod | NominalValue | Unit |
| MeltDensity | | | 1.12 | g/cm3 |
| 顶出温度 | | | 170 | °C |
| SpecificHeatCapacityofMelt | | | 2100 | J/kg/°C |
| ThermalConductivityofMelt | | | 0.20 | W/m/K |
