| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 |
| 密度 | | ISO1183 | 1.37 | g/cm3 |
| 收缩率 | 横向流量 | ISO294-4 | 1.1 | % |
| 收缩率 | 流量 | ISO294-4 | 0.30 | % |
| WaterAbsorption(Saturation,23°C,2.00mm) | | ISO62 | 6.0 | % |
| WaterAbsorption(Equilibrium,23°C,2.00mm,50%RH) | | ISO62 | 1.9 | % |
| 拉伸模量 | | ISO527-2 | 10000 | MPa |
| 拉伸应力(断裂) | | ISO527-2 | 200 | MPa |
| 拉伸应变(断裂) | | ISO527-2 | 3.3 | % |
| TensileCreepModulus(1hr) | | ISO899-1 | —— | MPa |
| 拉伸蠕变模量(1000hr) | | ISO899-1 | —— | MPa |
| 简支梁缺口冲击强度 | -30°C | ISO179/1eA | 10 | kJ/m2 |
| 简支梁缺口冲击强度 | 23°C | ISO179/1eA | 13 | kJ/m2 |
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 70 | kJ/m2 |
| 简支梁无缺口冲击强度 | 23°C | ISO179/1eU | 80 | kJ/m2 |
| 悬壁梁缺口冲击强度 | -30°C | ISO180/1A | 12 | kJ/m2 |
| 悬壁梁缺口冲击强度 | 23°C | ISO180/1A | 12 | kJ/m2 |
| 热变形温度(0.45MPa,未退火) | | ISO75-2/B | 261 | °C |
| 热变形温度(1.8MPa,未退火) | | ISO75-2/A | 253 | °C |
| 玻璃转化温度2 | | ISO11357-2 | 80.0 | °C |
| 维卡软化温度 | | ISO306/B50 | 250 | °C |
| 熔融温度2 | | ISO11357-3 | 262 | °C |
| 线形热膨胀系数-流动 | —— | ISO11359-2 | 2.6E-5 | cm/cm/°C |
| 线形热膨胀系数-流动 | -40to23°C | ISO11359-2 | 2.6E-5 | cm/cm/°C |
| 线形热膨胀系数-流动 | 55to160°C | ISO11359-2 | 1.3E-5 | cm/cm/°C |
| 线形热膨胀系数-横向 | —— | ISO11359-2 | 8.0E-5 | cm/cm/°C |
| 线形热膨胀系数-横向 | -40to23°C | ISO11359-2 | 7.0E-5 | cm/cm/°C |
| 线形热膨胀系数-横向 | 55to160°C | ISO11359-2 | 1.3E-4 | cm/cm/°C |
| 线形热膨胀系数-横向 | EffectiveThermalDiffusivity | ISO11359-2 | 1.10E-7 | m2/s |
| 表面电阻率 | | IEC60093 | —— | ohms |
| 体积电阻率 | | IEC60093 | >1.0E+15 | ohmscm |
| 介电强度 | | IEC60243-1 | 38 | kV/mm |
| 相对电容率 | 100Hz | IEC60250 | 4.30 | |
| 相对电容率 | 1MHz | IEC60250 | 4.10 | |
| 耗散因数 | 100Hz | IEC60250 | 7.0E-3 | |
| 耗散因数 | 1MHz | IEC60250 | 0.015 | |
| 相比耐漏电起痕指数(CTI)(3.00mm) | | UL746 | PLC1 | |
| 漏电起痕指数 | | IEC60112 | 450 | V |
| BurningRate3(1.00mm) | | ISO3795 | 24 | mm/min |
| UL阻燃等级 | 0.75mm | UL94 | HB | |
| UL阻燃等级 | 1.5mm | UL94 | HB | |
| FlammabilityClassification | 0.75mm | IEC60695-11-10,-20 | HB | |
| FlammabilityClassification | 1.5mm | IEC60695-11-10,-20 | HB | |
| 极限氧指数 | | ISO4589-2 | 24 | % |
| FMVSS可燃性 | | FMVSS302 | SE/B | |
| 雾化 | F-value(refraction) | ISO6452 | 95 | % |
| 雾化 | G-value(condensate) | ISO6452 | 3.0E-4 | g |
| 充模分析 | | TestMethod | Dry | Unit |
| MeltDensity | | | 1.20 | g/cm3 |
| 顶出温度 | | | 210 | °C |
| SpecificHeatCapacityofMelt | | | 2290 | J/kg/°C |
| ThermalConductivityofMelt | | | 0.21 | W/m/K |
| 补充信息 | | TestMethod | Dry | Unit |
| EmissionofOrganicCompounds | | VDA277 | 3.20 | ugC/g |
| Odor | | VDA270 | 4.50 | |
| ThermalDesorptionAnalysisofOrganicEmissions | | VDA278 | 5.00 | ug/g |
